| Rubric: Communication Units |
Compact SPS 110 CPU 622/722
Technical Specifications |
|
 |
| Power supply |
|
| Extern |
19,2 ? 30,0 VDC, max. 800 mA |
| Intern |
5 VDC, max. 250 mA |
| Binary outputs |
|
| Relay outputs |
12 ( 2 groups of 4 and 4 DC-isolated outputs) |
| Switching voltage |
24?30 VDC, 24?250 VAC |
| Maximum load current |
2 A / channel |
| Current pulse |
20 A for 1 cycle |
| Power dissipation |
500 VA (when switching) |
| Minimum load current |
20 mA |
| Maximum switching frequency |
5 Hz |
| Potential separation |
1780 VAC, 2500 VDC |
| Withstand voltage |
4 kV |
| Binary inputs |
|
| Number |
16 ( 2 groups of 8 ) |
| Potential separation |
Opto-coupler |
| ON voltage level |
15?30 VDC |
| OFF voltage level |
0?5 VDC |
| Input current (ON-state) |
minimum 3,4 mA at 15 VDC |
| Input current (OFF-state) |
maximum 0,6 mA at 5 V |
| Analog outputs |
|
| Number |
2 |
| Type |
Current outputs, voltage outputs |
| Voltage range |
0?10 V |
| Current range |
4 ? 20 mA |
| Group isolation |
1000 VDC, 1 minute max. |
| Resolution |
12 bit |
| Linearisation error |
+/- 0.05% max. |
| Analog inputs |
|
| Number |
4 |
Type
|
Current input, 20 mA full scale
Voltage input, 10 V full scale |
| Input range |
+/- 10 V, 0?10 V, 4?20 mA |
| Input resistance |
Current mode 250 Ohm, Voltage mode > 20 MOhm |
| Input protection |
|
| - Potential difference |
50 VDC max. |
| - Channel-to-channel |
30 VDC max. |
| - Overcurrent |
25 mA max. |
Resolution
|
16 bit for +/- 10 V
15 bit for 0?10 V
13 -> 14 bit for 4 ? 20 mA |
| Memory |
|
| CPU 622 |
128 kByte RAM |
| CPU 722 |
512 kByte RAM |
| Interfaces |
|
| RS-232 comm1 |
RJ45 for connecting programming devices |
| RS-232 comm2 |
RJ45 for remote control communication |
| RS-485 |
RJ11 for expansion links (up to 4 slave SPS) |
| State indicators |
|
5 x green
|
Power supply, RUN, comm1, comm2, I/A expansion link |
| 1 x yellow |
Ready, start-up check |
| 1 x red |
Battery status |
| Environmental conditions |
|
| Ambient temperature at operation |
0?60 degrees C |
| Storage temperature |
-40?+85 degrees C |
| Humidity |
95% not-condensing |
| Operating altitude |
3800 m |
| Mechanical specifications |
|
| Dimensions |
L x W x H = 254 x 76 x 158,75 mm |
| Weight |
1,45 Kg |
|
|
| Accessories (optional): |
Order No.: |
| FSK modem for leased lines UEM 201 |
12.UEM201 |
| Modem for analog dial lines UEM 301 |
12.UEM301 |
| Modem for GSM dial-up connections UEM 304 |
12.UEM304 |
| YDL 160 connection cable Micro-CPU to Modem UEM 201 |
14.YDL160 |
| KBL 062-50 connection cable for dial-up modem, length 0,5 m |
14.200.00 |
| KBL 062-300 connection cable for dial-up modem, length 3 m |
14.200.01 |
| Configuration software PRO U062 PLUS for IEC 870-5-101 protocol |
16.PROU062PLUS |
Configuration and diagnostic software PRO U062 PLUSDIAG
for IEC 870-5-101 protocol |
16.PROU062PLUSDIAG
|
| Configuration software PRO-U061 for Modnet 1/W protocol |
13.PROU061 |
|
|
|
